| Customization: | Available |
|---|---|
| Manufacturing Process: | Forging |
| Surface Treatment: | Galvanized |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Quantity(Pieces) | 1 - 50 | >50 |
| Est. Time(days) | 30 | To be negotiated |
Kelly is the main driver of the whole drill string.It transmits torsional energy from the rotary table through the drill string to the bit at the bottom of the hole. Kelly is a long square or hexagonal.precision machined heavy steel bar that is supported by the swivel through the rotary table and is connected to the first joint of drill pipe in the drill string.
Straightness of the kelly is very crucial in the manufacturing process, thus straightness inspection are carried out before, during and after each machining operation. The flats are precision-milled to API specification.All milling processes are performed on specially designed rigid kelly mills to ensure tight tolerances and high quality drive section.Each kelly is furnished with a pressed steel thread protectors.
Features and Benefits
Manufactured from AISI4145H-modified, fully heat-treated alloy steel with a Brinell hardness range of 285-341BHN and a minimum average Charpy impact value of 40ft-Ibs;
Ends and drive section,IDs and connections machined and inspected to API specification;
Ultrasonic inspection is performed on all section;
Shipped in a protective steel -cased scabbard;
When ordering please specify:
Kelly type (Square or hexagonal)
Nominal size and overall length
Upper and lower connection
Technical specification and parameters
Introduction:
Our company may act according to the user the request to produce Kelly and hexagonal Kelly, the length usually is 12.19 meters, uses AISI 4145H alloy structural steel manufacturing, and carries on the quenching and tempering treatment in the full length scope. The technique of production and the technical standard are completely in accordance with API, after heat treatment, apart from surface inch under to sampling under the room temperature to test its Brinell hardness to be possible to achieve reaches 285-341, minimum Charpy impact value is 54J.
| STANDARD SIZE FOR SQUARE KELLY | ||||||||||
| Size (in) | Length (ft) Top upset joint | Bottom upset | Bore | Drive Section | Weight | |||||
| A | B | LH | OD C (in) | RH | OD (in) | E (in) | F (in) | G (in) | (Ib) | |
| 2 1/2 | 40 | 37 | 6 5/8" Reg | 7 3/4 | 2 3/8 IF | 3 3/8 | 1 1/4 | 3 1/4 | 2 1/2 | 902 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 2 3/8 IF | 3 3/8 | 1 1/4 | 3 1/4 | 2 1/2 | 1023 | |
| 3 | 40 | 37 | 6 5/8" Reg | Apr-73 | 2 7/8IF | 4 1/8 | 1 3/4 | 3 7/8 | 3 | 1089 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 2 7/8IF | 4 1/8 | 1 3/4 | 3 7/8 | 3 | 1232 | |
| 3 1/2 | 40 | 37 | 6 5/8" Reg | 7 3/4 | 3 1/21F | 4 3/4 | 2 1/4 | 4 7/16 | 3 1/2 | 1320 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 3 1/21F | 4 3/4 | 2 1/4 | 4 7/16 | 3 1/2 | 1474 | |
| 54 | 51 | 6 5/8" Reg | 7 3/4 | 3 1/21F | 4 3/4 | 2 1/4 | 4 7/16 | 3 1/2 | 1716 | |
| 4 1/4 | 40 | 37 | 6 5/8" Reg | 7 3/4 | 4 IF | 6 | 2 13/16 | 5 1/2 | 4 1/4 | 1815 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 4 IF | 6 | 2 13/16 | 5 1/2 | 4 1/4 | 2068 | |
| 54 | 51 | 6 5/8" Reg | 7 3/4 | 4 IF | 6 | 2 13/16 | 5 1/2 | 4 1/4 | 2354 | |
| 5 1/4 | 40 | 37 | 6 5/8" Reg | 7 3/4 | NC50 | 7 | 3 1/4 | 6 7/8 | 5 1/4 | 2750 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | NC50 | 7 | 3 1/4 | 6 7/8 | 5 1/4 | 3146 | |
| 54 | 51 | 6 5/8" Reg | 7 3/4 | NC50 | 7 | 3 1/4 | 6 7/8 | 5 1/4 | 3674 | |
| 6 | 40 | 37 | 6 5/8" Reg | 7 3/4 | 6 5/8 FH | 8 | 3 1/2 | 7 5/8 | 6 | 3674 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 6 5/8 FH | 8 | 3 1/2 | 7 5/8 6 | 6 | 4224 | |
| 54 | 51 | 6 5/8" Reg | 7 3/4 | 6 5/8 FH | 8 | 3 1/2 | 7 5/8 | 6 | 4950 | |
| STANDARD SIZE FOR HEX KELLY | ||||||||||
| Size | Length (ft) | Top upset joint | Bottom upset | Bore | Drive Section | Weight | ||||
| (in) | A | B | LH | OD C (in) | RH | OD (in) | E (in) | F (in) | G (in) | (lb) |
| 3 | 40 | 37 | 6 5/8" Reg | 7 3/4 | 2 3/8IF | 3 3/8 | 1 1/2 | 3 3/8 | 3 | 990 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 2 3/8IF | 3 3/8 | 1 1/2 | 3 3/8 | 3 | 1100 | |
| 3 1/2 | 40 | 37 | 6 5/8" Reg | 7 3/4 | 2 7/8IF | 4 1/8 | 1 3/4 | 4 15/16 | 3 1/2 | 1276 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 2 7/8IF | 4 1/8 | 1 3/4 | 4 15/16 | 3 1/2 | 1474 | |
| 54 | 51 | 6 5/8" Reg | 7 3/4 | 2 7/8IF | 4 1/8 | 1 3/4 | 4 15/16 | 3 1/2 | 1716 | |
| 4 1/4 | 40 | 37 | 6 5/8" Reg | 7 3/4 | 3 1/21F | 4 3/4 | 2 1/4 | 4 25/32 | 4 1/4 | 1650 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 3 1/21F | 4 3/4 | 2 1/4 | 4 25/32 | 4 1/4 | 1848 | |
| 54 | 51 | 6 5/8" Reg | 7 3/4 | 3 1/21F | 4 3/4 | 2 1/4 | 4 25/32 | 4 1/4 | 2156 | |
| 5 1/4 | 40 | 37 | 6 5/8" Reg | 7 3/4 | 4 IF | 6 | 213/16 | 5 29/32 | 5 1/4 | 2244 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 4 IF | 6 | 2 13/16 | 5 29/32 | 5 1/4 | 2574 | |
| 54 | 51 | 6 5/8" Reg | 7 3/4 | 4 IF | 6 | 2 13/16 | 5 29/32 | 5 1/4 | 2970 | |
| 6 | 40 | 37 | 6 5/8" Reg | 7 3/4 | 4 1/2IF | 7 | 3 1/2 | 6 13/16 | 6 | 2904 |
| 46 | 43 | 6 5/8" Reg | 7 3/4 | 4 1/2IF | 7 | 3 1/2 | 6 13/16 | 6 | 3300 | |
| 54 | 51 | 6 5/8" Reg | 7 3/4 | 4 1/21F | 7 | 3 1/2 | 6 13/16 | 6 | 3894 | |
| KELLY COCK | ||||||||||
| OD: 4 3/4, 5 5/16, 6 5/8, 7, 7 1/4, 7 3/4, 8 inch. The body is made of a single piece of forged AISI 4145 H modified alloy steel, full treated to 285-341 Brinell Hardness and 40 ft-lb | ||||||||||
){kind=link}